MOUNTING ACCESSORIES
MODULAR PATCH BAYS
Upgrade your pedalboard with a passive pass-thru box - designed specifically to fit the needs of all types of players!

MOD 1
5 x ¼" TRS thru
1 x XLR thru (male front / female back)
1 x DC 2,1 x 5,5 mm barrel thru
1 x AC IEC thru (male front / female back)
All connections mirrored on backside
Dimensions w/ front plate 6.88" x 3.4" x 3.9"
w/o front plate 6.32" x 3.75" x 1.31"
1.0 lbs
Mounting screws, counter nuts and TX wrench included
MOD 1 V1: Red, fixed front plate
MOD 2 V2: Black, removable front plate
TRS - XLR - POWER

MOD 2
4 x ¼" TRS thru
2 x 5-pin DIN MIDI thru
1 x USB Type A thru
1 x DC 2,1 x 5,5 mm barrel thru
1 x AC IEC thru (male front / female back)
All connections mirrored on backside
Dimensions w/ front plate 6.88" x 3.4" x 3.9"
w/o front plate 6.32" x 3.75" x 1.31"
1.0 lbs
Mounting screws, counter nuts and TX wrench included
MOD 1 V1: Blue, fixed front plate
MOD 2 V2: Black, removable front plate
TRS - USB - MIDI - POWER

MOD 3
3 x ¼" TRS thru
2 x XLR thru (male front / female back)
1 x XLR thru (female front / male back)
1 x DC 2,1 x 5,5 mm barrel thru
1 x AC IEC thru (male front / female back)
All connections mirrored on backside
Dimensions w/ front plate 6.88" x 3.4" x 3.9"
w/o front plate 6.32" x 3.75" x 1.31"
1.0 lbs
Mounting screws, counter nuts and TX wrench included
MOD 1 V1: Grey, fixed front plate
MOD 2 V2: Black, removable front plate
TRS - XLR - POWER
TAKE YOUR BOARD TO THE NEXT LEVEL
The newest generation of organization
WIRELESS - TRS - POWER

MOD 4
Compatible with XVive U2 guitar wireless system
2.4 GHz ISM band for worldwide use
100 ft. approx. range (without obstacles)
24 bit / 48 kHz uncompressed digital transmission
20 Hz - 20 kHz frequency range
5 ms latency
> 103 dB dynamic range
85 dBm RF sensitivity
0.2% total harmonic distortion
4 x 1/4" stereo thru (TRS)
1 x 1/4" mono receiver audio output (TS)
1 x DC 2.1 x 5.5 mm barrel thru
1 x AC IEC thru
1 x USB Type A charge output
Power supply via optional 9V DC power adapter
2.1 x 5.5 mm barrel plug, polarity (-) center
Battery operation not supported
Current draw 500 mA
Passive operation possible (patchbay only, without wireless system)
All connections mirrored on backside
2 antennas, USB charging cable, mounting screws and counter nuts included
Dimensions w/ front plate 6.88" x 3.4" x 3.9" w/o front plate 6.32" x 3.75" x 1.31"
WIRELESS - TRS - POWER

MOD 5
TRS - DI - CAB SIMULATOR
Cabinet simulation & DI patchbay
IR based speaker cabinet simulation
6 integrated IRs select-able
Support of additional Custom IRs (max. 1024 points.)
Integrated active DI box
Headphone amplifier
Selectable MONO / STEREO input
Selectable UN / BALANCED output
Ground lift switch
Control for headphone volume
3 x 6.3 mm / ¼" TRS thru
XLR DI Out
¼" Parallel TRS output
1/8" stereo headphone output with adjustable volume
Micro USB connection for firmware updates and loading custom IRs
Power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
Current draw 300 mA
Battery operation not supported
All connections mirrored on backside
1.04 lbs.
Mounting screws, counter nuts and TX wrench included
Dimensions w/ front plate 6.88" x 3.4" x 3.9" w/o front plate 6.32" x 3.75" x 1.31"
CONTROL YOUR CONDITION
PEDALSAFE
The RockBoard PedalSafe system was designed to keep your beloved pedals safe, secure and in pristine condition. Never sweat a surprise rain storm at your outdoor gig again! The flexible PedalSafe Protective Cover is available with a Universal Mounting Plate or a RockBoard QuickMount. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments.
QUICKMOUNT
The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue.


