Sadowsky_Pedals_Logo_blackDXISKIimJov9y.png

PREAMP PEDALS

The Sadowsky Bass Preamp offers bassists the same electronics that has been built into every Sadowsky bass for over 30 years. With the flexible combination of preamp and DI box, the pedal can be used in the effects setup in front of the amplifier or to connect your bass directly to a mixer or the PA. The control options are kept simple with Volume, Treble and Bass, Treble and Bass only work as a boost. The SBP-1 Bass Preamp is ideal for upgrading old vintage instruments where you don't want to change the original electronics. The best results are achieved with passive basses or circuits with active pickups, where you can bypass the active electronics.

PREAMP PEDALS

SAC_PED_SBP_2_02.jpg

SADOWSKY SBP-2 BASS PREAMP

SAC_PED_SBP_1_02.jpg

SADOWSKY SBP-1 BASS PREAMP/DI

  • Bass preamp / EQ / DI effects pedal

  • Offers the same quality Sadowsky electronics that are built into Sadowsky basses

  • Boost only EQ section for Bass and Treble

  • Switchable mute for the instrument

  • DI output to connect the pedal directly into a PA or recording console

  • Bass + 18 dB boost at 40 Hz

  • Treble + 18 dB boost at 4 kHz

  • True bypass

  • Controls for Volume, Treble, Bass

  • Ground Lift switch

  • Bypass footswitch (On / Off)

  • Mute footswitch

  • Status LEDs

  • Metal housing

  • 6.3 mm mono in / output jacks

  • 6.3 mm mono tuner output

  • XLR out (DI)

  • Power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center

  • Current draw 11 mA

  • Dimensions (L x W x H) 106 x 107 x 61 mm / 4.17" x 4.21" x 2.4"

  • Weight ca. 780 g / 1.72 lbs

  • Bass preamp / EQ effects pedal

  • Offers the same quality Sadowsky electronics that are built into Sadowsky basses

  • Boost only EQ section for Bass and Treble

  • Bass + 18 dB boost at 40 Hz

  • Treble + 18 dB boost at 4 kHz

  • True bypass

  • Controls for Volume, Treble, Bass

  • Bypass footswitch

  • Status LEDs

  • Metal housing

  • 6.3 mm mono in / output jacks

  • Power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center

  • Current draw 3 mA

  • Dimensions (L x W x H) 112 x 70 x 53 mm / 4.41" x 2.75" x 2.08"

  • Weight ca. 265 g / 0.58 lbs